Mechanical Timer
A mechanical timer is a device that uses a mechanical device to set and trigger time. It mainly uses a spring or gravitational potential energy to drive a mechanical vibration system to achieve time measurement.
The working principle of mechanical timer
Mechanical timers usually consist of the following main parts:
Clockwork: It is made of elastic steel tape and is wound by a knob to store potential energy. When the spring automatically relaxes, it releases stored energy and drives other mechanical components.
Gear transmission mechanism: according to the different way of gear clutch when the spring up, mechanical timers can be divided into spring tube type, pawl type and small spring type three transmission mechanisms.
Time control component: usually use one or two groups of CAM to allocate time, control CAM rotation, and constantly change its concave and convex position, so that the contact of the relevant contact spring is connected or disconnected according to the design requirements
The working principle of the mechanical timer is based on the principle of the clock mechanism. Spring as a power source, through the gear transmission mechanism and time control components to achieve the setting and triggering of time. When the spring is relaxed, the stored energy is released, which drives the gear transmission mechanism and time control assembly, and finally triggers the set time point.
Features of mechanical timer
Principle is simple to understand: The working principle of mechanical timer is based on the clock mechanism, the structure is intuitive, do not need complex electronic knowledge to understand its working principle.
Low cost: The manufacturing process is relatively simple, the material cost is not high, so the price is relatively close to the people.
High reliability: In the absence of strong external damage and adverse environmental impact, can run stably.
No power: Rely on spring and other mechanical structure to provide power, is not limited by power supply.
Limited timing range: It is usually possible to set a relatively narrow time range with a timing scale of 15 minutes.
Limited accuracy: Affected by the manufacturing accuracy of mechanical parts and wear and other factors, timing accuracy is often not accurate.
Operation is not flexible: It is difficult to achieve complex timing mode and segmented timing function.
Susceptible to environment: Environmental factors such as temperature and humidity may affect its performance and accuracy.
Application of mechanical timer
Mechanical timers are widely used in a variety of occasions that require timing control, such as household appliances (such as rice cookers, coffee makers, etc.), industrial equipment, etc. Its structure is precise, the failure rate is low, the action is sensitive and practical accurate.
For example, users can control the time by setting the tightness of the clockwork and trigger a bell or other signal at a predetermined time.
FAQ
Q: What constitutes a mechanical timer?
A: Mechanical timer is composed of a spring, gear transmission mechanism, time control component , escapement mechanism, disk spring and other components.
Q: Do mechanical timers need batteries?
A: No need, mechanical timers are driven by the force released by the spring.
Q: Are mechanical timers environmentally friendly?
A: First of all, mechanical timers do not need batteries, so there is no battery waste problem, in line with environmental requirements. Secondly, mechanical timers are driven by clockwork and do not depend on electricity supply, thus reducing energy consumption and carbon emissions. In addition, mechanical timers are typically designed to be durable, reducing the need for frequent equipment replacement and further reducing their environmental impact.
Q: Is there a time error on the mechanical timer?
A: Mechanical timers usually have a time error of plus or minus three percent, while electronic timers have basically no error.
Q: What is the service life of the mechanical timer?
A: Mechanical timers usually have a service life of about 10 to 15 years, but with regular maintenance and replacement of worn parts, their service life can be extended to more than 20 years.
Q: Can mechanical timers be cleaned with water?
A: Mechanical kitchen timers can not be cleaned directly with water, the surface can be moderately wiped with a towel dipped in water, and electronic kitchen timers can not meet water at all, of course, except for some waterproof models.
As one of the leading mechanical timer manufacturers and suppliers in China, we warmly welcome you to wholesale cheap mechanical timer from our factory. All custom made products are with high quality and competitive price.
Mechanical Clock Timer, Mechanical Timer Outdoor, Outdoor Mechanical Timer Switch